Centrifugal Blowers are tailor made and sizes depend on individual requirement, should you require any information please feel free to get in touch with us.

FAN DUTY For handling Air, Hot Flue Gas, Dust, Fibrous Material and Corrosive Gases.
Carbon Steel , Stainless Steel , Aluminium , Rubber Lined , Epoxy Painted , Chlorinated Rubber Painted .
CONSTRUCTION Corrosion and Acid Resistant Fans, Wear Protected , Explosion Protected, Gas Tight Fans, Poisonous and Risky Gas Fans.
BEARINGS Ball Bearings, Roller Bearings, Oil Lubricated Bearings, Grease Lubricated Bearings, Water Cooled Bearings.
SHAFT SEALS Metal Asbestos Seal, Labirinth Seals, Packed Stuffing Box, Stuffing Box with Intermediate Pressure Relief Chamber.
HOUSING Steel Fabricated welded construction braced with steel flats and angles. Split casing can be provided for large sizes. Inspection door and drain plug can be provided.
IMPELLER Impeller can be made in Light , Medium and Heavy construction Class I , II and III. Steel or Cast Iron Hub will be Welded, Bolted or Riveted. Impeller will be Statically and Dynamically Balanced .
SHAFT Shaft are of EN - 8 / SS316 / SS304 properly sized to keep away from critical speed.
BEARING LIFE Bearings are designed for long life . This life can be attained when properly lubricated, kept clean, tensioning belts correctly and keeping Impeller clean and balanced. Smaller ‘V’ Pulleys and improper belt tensions reduces the life considerably. Proper care and Lubrication increases the life beyond this.
VIBRATIONS Vibration isolators and flexible connections at inlet and outlet can minimize transmission of vibration and noise to building structure and ducts .

Please click here to go to PRODUCTS page.